• CR6K Station with 6x1 switch + 6x2 switch + Power Splitter in SO2R configuration

About Us

The switches are built by CT1ILT Filipe, we have been building this kind of switches for 2 years now.

Products

Automatic/Manual Band Decoder

6x1 switch

6x2 switch

Power Splitter

Product Specifications

6x1 switch

Specifications:


  • 6 ANTENNA POSITIONS TO 1 RADIO

  • Impedance: 50 Ohm
  • Operating frequency: 1 to 50 MHz
  • Relay Box: IP65 (water proof)
  • Connecteurs: PL or N both Amphenol

  • Power handling:
  • 3000 W with SWR 1:1.5 -> 1.8 MHz to 30 MHz
  • 1500 W with SWR 1:1.5 -> 30 MHz to 50 MHz

  • Box Dimensitions:
  • Control (W x L x H): 111 mm x 63 mm x 60 mm
  • Relay (W x L x H): 145 mm x 222 mm x 67 mm

    • SM2WMV aka SJ2W PCBs
    • Simple wiring with DB9 to allow easy compability with Band Decoders
    • Antenna is Grounded when not used (Good against static discharges)
    • 0.05 dB insertion loss on 28 MHz
    • 0.19 dB insertion loss on 50 MHz
    • Isolation between ports is about 70dB +/- some dB depending on which port is used





    6x2 switch

    Specifications:


  • 6 ANTENNA POSITIONS TO 2 RADIOs

  • Impedance: 50 Ohm
  • Operating frequency: 1 to 50 MHz
  • Relay Box: IP65 (water proof)
  • Connecteurs: PL or N both Amphenol

  • Power handling:
  • 3000 W with SWR 1:1.5 -> 1.8 MHz to 30 MHz
  • 1500 W with SWR 1:1.5 -> 30 MHz to 50 MHz

  • Box Dimensitions:
  • Control (W x L x H): 111 mm x 63 mm x 60 mm
  • Relay (W x L x H): 174 mm x 275 mm x 67 mm




  • Power Splitter

    Specifications:


  • Power Splitter for 3 Antennas

  • Antenna combinations: A, B, C, A+B, A+C, B+C, A+B+C

  • Output Impedance: 50 Ohm
  • Operating frequency: 1 to 30 MHz
  • UNUN Transformer using 1 or 2 FT240-61
  • Relay Box: IP65 (water proof)
  • Box control connector: 5 pin connector also IP65 (water proof)
  • RF Connecteurs: PL or N both Amphenol
  • Control Voltage: 12 - 15 VDC
  • NO VOLTAGE APPLIED = ALL ANTENNAS CONNECTED!

  • Power handling:
  • Using 1 FT240-61 Torroids: Maximum 4000 W with SWR 1:1.5 -> 1.8 MHz to 30 MHz
  • Using 2 FT240-61 Torroids: Maximum 2000 W with SWR 1:1.5 -> 1.8 MHz to 30 MHz

  • Box Dimensitions:
  • Control (W x L x H): 105 mm x 130 mm x 55 mm
  • Relay (W x L x H): 175 mm x 120 mm x 60 mm

    • SM2WMV aka SJ2W PCBs
    • Simple wiring with DB9 to allow easy compability with Band Decoders
    • Antenna is Grounded when not used (Good against static discharges)

    Band Decoder

    Specifications:


  • Automatic Band Decoder / Manual switch
  • This device allows you to change your antenna switch automatically or manually. You just need a BCD code on the input, you can use either with your radio or with your controlling device like Microham u2R, MK2R+ etc.

  • Decoded Bands: 10m, 12m, 15m, 17m, 20m, 30m, 40m, 80m, 160m
  • Input control: BCD
  • Output control: +12 VDC each port
  • Control Voltage: +12 to +15 VDC
  • Output current capability: 350mA per output
  • Bands are coded as follows:

  • Box Dimensitions: (W x L x H): 105 mm x 105 mm x 50 mm

    • Simple wiring with DB9 and DB15 connector

    Price and Shipping

    Please use the contact form bellow for enquires about price and transportation.

    We can answer your questions...